web_led.py
A minimal Flask server exposes /on and /off to drive an LED on GPIO17 from any LAN browser. Without built-in Wi-Fi, connect over Ethernet/USB dongle: alimentation micro-USB 5 V/1,2 A, pas de Wi-Fi intégré (Ethernet ou clé USB). It listens on 0.0.0.0:8000; never expose the board to the Internet.
Hardware
A Raspberry Pi Model B+ (BCM2835, 40-pin GPIO header, micro-USB power, 3.5 mm 4-pole audio jack). LED + 330-ohm resistor, local network (Ethernet, Wi-Fi or USB dongle per model).
Wiring
LED on GPIO17 (pin 11) with resistor to GND. Nothing else but networking.
How it works
Each URL is a Flask route: the view calls led.on/off then re-renders with led.value. The single-thread server is fine for a demo.
Running it
Copy the script to the board (scp), then run it with python3 (or bash). Install gpiozero with sudo apt install python3-gpiozero if missing. The 40-pin pinout is in the official schematic and on the Raspberry Pi website.
Variants
Radio buttons for several GPIOs; systemd unit as a service; add flask-login before any network exposure. No built-in Wi-Fi: use Ethernet or a USB dongle; 5 V/1.2 A micro-USB supply.
web_led.py
# web_led.py — page web locale pour allumer/eteindre une LED (Flask).
# Deps: sudo apt install python3-flask python3-gpiozero
from flask import Flask
from gpiozero import LED
app = Flask(__name__)
led = LED(17)
@app.route("/")
def index():
etat = "allumee" if led.value else "eteinte"
return (f"<h1>LED {etat}</h1>"
'<p><a href="/on">Allumer</a> | <a href="/off">Eteindre</a></p>')
@app.route("/on")
def on():
led.on()
return index()
@app.route("/off")
def off():
led.off()
return index()
if __name__ == "__main__":
app.run(host="0.0.0.0", port=8000)