esp32-p4-hydra-wifi-c6-proxy.ino
Establishes a WiFi connection using the dedicated ESP32-C6 coprocessor, keeping the P4 core free for computation.
Replace WiFi credentials. This demo relies on the SDIO architecture between P4 and C6. The C6 handles the WiFi/BT stack. Ensure the C6 firmware is compatible with recent Arduino cores. Throughput depends on the SDIO link.
esp32-p4-hydra-wifi-c6-proxy.ino
#include <Arduino.h>
#include <WiFi.h>
// L'ESP32-P4 n'a pas de radio WiFi native. Il utilise le coprocesseur ESP32-C6 via SDIO.
// La bibliothèque WiFi standard d'Arduino pour ESP32 gère généralement cette abstraction
// si le core est bien à jour pour le P4.
const char* ssid = "VOTRE_SSID";
const char* password = "VOTRE_MOT_DE_PASSE";
void setup() {
Serial.begin(115200);
Serial.println("Metro ESP32-P4 Hydra: WiFi Connect via C6");
WiFi.begin(ssid, password);
Serial.print("Connecting to WiFi");
int attempts = 0;
while (WiFi.status() != WL_CONNECTED && attempts < 20) {
delay(500);
Serial.print(".");
attempts++;
}
if (WiFi.status() == WL_CONNECTED) {
Serial.println("\nConnected!");
Serial.print("IP Address: ");
Serial.println(WiFi.localIP());
Serial.print("RSSI: ");
Serial.print(WiFi.RSSI());
Serial.println(" dBm");
} else {
Serial.println("\nConnection Failed");
}
}
void loop() {
delay(5000);
}