clignotante.py
The LattePanda pattern: the Python script runs on the x86 PC, the physical pin lives on the ATmega32U4, and PinPong bridges them in one line. The Arduino world becomes a PC library.
Hardware required
A LattePanda 3 Delta (x86 Intel N5105, Windows 10/11 or Ubuntu) with its Arduino-compatible co-processor (ATmega32U4) wired to the two 50-pin headers. 1 LED + 330 Ω resistor on the 50-pin header (MCU pin D13).
Wiring
Anode on the header's D13 pin (see the schematic), 330 Ω resistor, GND on a GND pin of the same header.
How it works
Board().begin() opens the internal serial port to the MCU; Pin(D13).write_digital drives the pin Arduino-style. The PinPong firmware must be flashed on the 32U4 (shipped with the library). Host side: pip install pinpong then python3. MCU side: the ATmega32U4 shows up as a COM port — program it with the Arduino IDE (« Arduino Leonardo » board).
Going further
Modulate the period with a sensor, or drive two LEDs from two Python threads.
clignotante.py
#!/usr/bin/env python3
# Clignotement LED via PinPong : Python cote hote, GPIO sur l'ATmega32U4.
# Installation : pip install pinpong
from pinpong.board import Board, Pin
from pinpong.extension.unipiot import * # chargement standard
import time
Board().begin() # detecte le MCU (port serie interne)
led = Pin(Pin.D13, Pin.OUT)
print("Clignotement D13 (Ctrl-C pour arreter)")
try:
while True:
led.write_digital(1)
print("ON")
time.sleep(1)
led.write_digital(0)
print("OFF")
time.sleep(1)
except KeyboardInterrupt:
led.write_digital(0)
print("Arret propre")