⚖ Comparison : BeaglePlay (TI Sitara AM6254 / AM625) vs LattePanda 3 Delta (id: lattepanda-3)
Comparison of declared technical characteristics : BeaglePlay (TI Sitara AM6254 / AM625) et LattePanda 3 Delta (id: lattepanda-3) (26 characteristics). See the full board sheet : BeaglePlay (TI Sitara AM6254 / AM625) · LattePanda 3 Delta (id: lattepanda-3).
| Characteristics | BeaglePlay (TI Sitara AM6254 / AM625) | LattePanda 3 Delta (id: lattepanda-3) |
|---|---|---|
soc | Texas Instruments Sitara AM6254 (AM625 family, industrial-grade 13×13 mm ALW package) (announcement, TI AM625 product page, docs introduction). | — |
cpu | 4× Arm Cortex-A53 @ 1.4 GHz (64-bit), 512 KB shared L2, 32 KB L1 I-cache + 32 KB L1 D-cache per core (announcement; 1.4 GHz OPP confirmed in the mainline DTS opp-1400000000 node, k3-am625-beagleplay.dts). | — |
real_time_cores | 1× Cortex-M4F up to 400 MHz, 1× Cortex-R5F (K3 management core), dual-core PRUSS (PRU-ICSS) @ 333 MHz (announcement). | — |
gpu | Imagination PowerVR AXE-1-16M ("Rogue" branding in CNX), up to 2048×1080@60, OpenGL ES 3.1, Vulkan 1.2 (Wikipedia table, announcement). | Intel UHD Graphics (UHD 605 per CNX), 450 MHz – 800 MHz. |
ram | 2 GB DDR4 (1Gbx16, 1600 MHz / 3200 Mbps) (announcement; DTS memory node / 2G RAM /). | 8 GB LPDDR4 @ 2933 MHz (soldered; only configuration). |
storage | 16 GB eMMC (HS200-capable, mmcblk0) + microSD slot (1.8/3.3 V signalling via vdd_sd_dv regulator) (docs introduction, DTS). | - 64 GB eMMC V5.1 (onboard) - M.2 Key M 2280 — PCIe 3.0 x2 (NVMe SSD) - M.2 Key B 2242/2252/2280 — SATA III (optional PCIe 3.0 x1 via BIOS update), USB 2.0, USB 3.0, SIM (4G/5G modem option) - Micro-SD + Micro-SIM combo card connector |
wired_networking_dual_ethernet | - 1× Gigabit Ethernet RJ45 — Realtek RTL8211F PHY, integrated magnetics, on CPSW3G port 1 (RGMII) (docs introduction, DTS). - 1× Single-Pair Ethernet RJ11 — TI DP83TD510E 10BASE-T1L PHY (IEEE 802.3cg), 10 Mbit/s only (not 10/100 — the brief's "10/100 mode" is imprecise), long-reach SPE with PoDL output 5 V @ 250 mA (board supplies power over the pair; its PoDL input is protection-only to 12 V) (docs introduction, announcement). - SoC-side: 3-port CPSW Gigabit switch with TSN support (1 internal + 2 external ports) (docs introduction). | — |
wireless | dual-band Wi-Fi 4 (2.4 + 5 GHz) via TI WiLink8 WL1807MOD (SDIO, 2× U.FL); BLE + sub-GHz IEEE 802.15.4 via dedicated TI SimpleLink CC1352P7 wireless MCU (M4F+M0) running open BeagleConnect firmware (1× 2.4 GHz + 1× sub-GHz U.FL); 4× U.FL connectors total (announcement, docs introduction). BeagleConnect reaches "up to 1 km" to a BeagleConnect Freedom (product page). | Intel AX201 — Wi-Fi 6 (802.11ax, 2.4 GHz + 5 GHz, 160 MHz), Bluetooth 5.2; two IPEX4 antenna sockets (one per radio chain set). |
usb | 1× USB-C (5 V power input + HS device/data role; no PD, no DRP/host on USB-C) + 1× USB 2.0 Type-A host (docs introduction). | 1× USB 3.2 Gen 2 Type-A (10 Gbps), 2× USB 3.2 Gen 1 Type-A (5 Gbps), 1× USB 2.0 Type-C (power PD input + 480 Mbps data + DP Alt Mode), 1× USB 2.0 header. |
display_camera | full-size HDMI Type-A up to 1080p via IT66121 DPI-to-HDMI transmitter (with I2S audio, simple-audio-card in DTS); 40-pin OLDI (dual-link LVDS) FPC (pin-compatible with 10.1″ 1920×1200 capacitive touch panels); 22-pin 4-lane MIPI CSI camera FPC, connector-compatible with BeagleBone AI-64 / Raspberry Pi Zero / CM4 cameras (docs introduction, docs expansion, DTS). | — |
gpio_expansion | mikroBUS socket (SPI, I2C, UART, PWM/eCAP, analog input, 3.3 V/5 V, ClickID auto-detect), Grove (I2C-1 + UART5 + analog + GPIO), QWIIC/STEMMA QT (I2C-5 = mcu_i2c0); SoC GPIO banks are mixed 3.3 V and 1.8 V (separate schematic sheets "SoC GPIO 3.3V" and "SoC GPIO 1.8V & Bootstrap", hardware repo); AM62 also exposes CAN-FD, GPMC, OSPI, up to 6× MCU_SPI on the SoC (TI AM62x TRM) — not all routed to connectors. | — |
misc | RTC BQ32002 with CR1220 coin-cell backup, 5 user LEDs + power LED + CC1352-RF + SPE link LEDs, USER button (also SD-card boot selector), Reset and Power buttons, 2× 10-pin TAG-CONNECT JTAG (AM62 and CC1352), 24C32 system EEPROM (docs introduction, DTS). | RTC with CR927 3 V battery; hardware watchdog (IT8613E Super I/O); auto power-on; active fan cooling (50 % larger cooling area vs. previous Delta). |
power | 5 V / 3 A via USB-C only (no barrel jack); PMIC TPS6521903 (TPS65219 family; the "03" sequencing variant is used for the DDR4 system) (docs design). | input range 11–15 V, ≥24 W: - USB Type-C PD input: 15 V/3 A or 12 V/3 A (recommended) - JST PH2.0-4Pin DC input: 12 V ≥2 A (boot peak ≈ 12 V 1.5A); board marking -- DC ++ - Dual-input automatic failover between Type-C and JST without interruption - UPS Hat accessory (DFR0682, 3× 18650, HID-UPS protocol) - Source: |
typical_consumption | "a board typically consuming 400 mA at 5 V (2 W)" — official hardware-design rationale text (docs design). | SoC TDP 10 W; ≥24 W supply required. |
size_weight | 82.5 × 80 × 20 mm bare board, 55.3 g (docs support). | — |
temperature | AM6254 is an industrial-grade SoC and the WL18x7MOD module is "industrial temperature grade" (docs design). | — |
soc_cpu | — | Intel Celeron N5105 (Jasper Lake, 10 nm), 4 cores / 4 threads, 2.00 GHz base – 2.90 GHz burst, 10 W TDP (docs + CNX; lattepanda.com product page calls it "Intel 11th Gen mobile quad-core quad-thread"). |
npu | — | none. |
video_out | — | HDMI 2.0b; DisplayPort 1.4 via USB Type-C (Alt Mode); eDP 30-pin (two lanes) + touch-panel connector. Up to dual 4K / 3-way simultaneous output (product page). |
audio | — | 3.5 mm headphone+mic combo jack; 2-channel audio output with 2 W amplifier on pin header (product page). |
ethernet | — | Intel I211-AT / I225-V PCIe Gigabit LAN, Wake-on-LAN supported. |
gpio_expansion_headers_female_two_50_pin_blocks_per_cnx | — | - ATmega32U4 Arduino pinout: 24 digital I/O (D0–D23); 7 PWM pins marked ~: D3, D5, D6, D9, D10, D11, D13 (official PWM tutorial); ADC and I2C tutorials exist (docs IO_Playability/ADC, IO_Playability/I2C). - RS232 COM port, USB 2.0 header, audio header, system status control & indication, BIOS-flash pinout, 5 V & 3.3 V outputs, 12 V DC input pins. |
co_processor | — | Microchip ATmega32U4-MU (8-bit AVR, Arduino Leonardo compatible), with dedicated Arduino reset button. |
security | — | built-in TPM 2.0. |
dimensions | — | 125 × 78 × 16 mm (official docs; CNX lists 125 × 76 × 16 mm). |
environment | — | operating 0–60 °C, 0–80 % RH. Certifications: CE, FCC, KC, RoHS. |
BeaglePlay (TI Sitara AM6254 / AM625) LattePanda 3 Delta (id: lattepanda-3)